What are the characteristics of the pipe chain conveyor? Let's take a look at the explanation of the screw conveyor manufacturers.

1. Compact structure, which can change the conveying direction in three dimensions.

2, fully enclosed transport, no dust spill, clean and environmentally friendly.

3. During the material transportation process, the energy consumption is low, and the operating cost is greatly reduced.

4. The horizontal conveying distance is 60 meters and the lifting height is 40 meters. Large capacity up to 300 m3/h.

5. There is no dead zone in the pipeline.

6, no metal friction, a large reduction in noise.

7. Low maintenance costs.

8, long service life.

9, explosion-proof design and airtight design.

10, can be loaded with heavy load.

11. Great guarantee of material integrity.

12. Volumetric conveying device can realize material conveying and metering. It is easy to achieve centralized control, improve the degree of automation, and meet the requirements of modern enterprises for environmental protection.

There are several reasons for the occurrence of chain chain conveyor chain breakage;

1. The selection designer's calculation error or selection error, so that the selected chain can not meet the working tension during normal operation.

2. The manufacturing quality of the chain does not meet the design requirements, and the allowable load is lower than the selected value.

3. The split pin on the chain is worn and not replaced in time, so that the connecting pin is detached and the chain is broken.

4. A large piece of hard or iron is mixed into the conveying material, and the chain suddenly catches the overload and breaks the chain during operation.

5. Inadvertent installation of the whole machine or the connection flange and guide rail between the casings due to vibration and impact, the upper and lower sides are greatly displaced, and the chain conveyor causes the chain to be jammed and broken. .

It is suitable for people to concentrate on one place. The feeding point can be one or several, and the feeding tube can be equipped with one or several branch pipes. Not only can several materials from the material point be transported to the discharge point in turn, but also several materials at the feed point can be transported to the discharge point at the same time. Under negative pressure, the material is easily inhaled, so the supply at the throat is simple. The hopper can be opened for continuous feeding and conveying. The material is transported under negative pressure, and the water is easy to evaporate. Therefore, the material with higher moisture content is easier to transport than the pressure feed type; the material supplied under heating can be cooled by transport. The components must be kept sealed, and the construction of components such as country separators, dust collectors, and air lockers is complicated. The pneumatic conveying fan is located at the end of the system and requires a high degree of air purification.