The pipe chain conveyor is a continuous conveying device for conveying bulk materials such as powder, small particles and small blocks, which can be transported horizontally, obliquely and vertically. In the closed pipe, the chain is used as the transmission member to carry the animal material along the pipe. When transported horizontally, the material particles are subjected to the thrust of the chain in the direction of motion. When the internal friction between the material layers is greater than the external friction between the material and the pipe wall, the material moves forward with the chain to form a stable flow; when vertically transported, the material particles in the pipe are pushed upward by the chain because the lower part The feeding material prevents the upper material from sliding down, and the lateral side pressure is generated, so the internal friction of the material is enhanced. When the internal friction between the materials is greater than the friction between the material and the inner wall of the tube and the weight of the material, the material is transported upward with the chain. A continuous stream is formed.

Conveying capacity 0.4-300m3/h

Conveying distance : Level 50-70; Vertical 40-50m

Power: 0.2-20KW

Pipe chain conveyor advantages:

1 Volumetric conveying device for material conveying and metering. Easy to achieve centralized control, improve automation, meet the requirements of modern enterprises for environmental protection

2 Compact structure, small footprint, can change the conveying direction in three dimensions.

3 The material being conveyed is in a closed state from the inlet to the outlet flange. It is not necessary to install a dust collector at the exit. The gas can be filled while conveying the material. No dust can be leaked into the environment during transportation.

4 The material is smoothly conveyed along the pipe, and there is basically no internal movement, so the material is less damaged, and the slow curve conveys so that few material particles generate debris.

5 Depending on the feeding situation, the inlets can be more than 10 meters apart.

6 The sprocket has an optimized shoulder and is optimized for design with a hardened chain for minimal wear.

7 Special conveyor plate with extremely low friction coefficient and stable conveying capacity.

8 All of our pipe chain conveyors use self-developed calculation procedures to maintain the necessary static friction and tension of different parts such as the conveyor pipe and curved parts of the conveyor, providing high accuracy data for designing low noise and low wear. .