The brake device at the tail of the stainless steel scraper conveyor is sensitive and reliable, and its limit clamping device should be able to independently withstand the large wind force under working conditions without being blown by the wind. The rack mounting of the scraper conveyor starts from the headstock, then installs the intermediate racks in sequence, and finally installs the tailstock. According to the relevant regulations and guidelines, the scraper conveyors we produce all adopt the standard top chain as the bearing surface, and the motor reducer is the power transmission, which is supported in the special guide rail.

The scraper conveyor should have some basic knowledge of use before use. The scraper conveyor should be careful not to contact with the acid, alkali, oil, water and other pollutants and keep away from the heat source during the use; avoid long-term direct sunlight and rain. Snow immersion; storage temperature should be maintained at -10 ° C ~ 40 ° C, relative humidity should be maintained at 50% ~ 80%. In addition to this, you need to have the following basic knowledge:

(1) When using the scraper conveyor, it is strictly forbidden to connect the belts of different types and different specifications.

(2) Prevent folding and hard phase pressure during use. It should be used for storage and storage.

(3) The direction of the conveyed material and the speed at which the material falls are consistent with the direction and speed of the belt.

(4) Before use, generally start the machine first, so as to avoid the motor overload and the conveyor belt slipping. Before stopping the machine, all the materials of the belt should be unloaded.

(5) The tension should not be too large during use, and it should work under the minimum tension on the premise that the drive roller does not slip and the material does not transition.

(6) The scraper conveyor should not make the belt run off or snake running during transportation, and should be adjusted in time.

(7) If there is slipping or pulling in the use, the fault should be eliminated in time, the tensioning system should be adjusted, and the elastic device should be kept flexible.

The scraper conveyor can be transported horizontally, obliquely and vertically, or it can form a space transport line, which is generally fixed. The chain conveyor has large conveying capacity and long transportation distance, and can also complete several process operations in the transportation process at the same time, so the application is very extensive.